replica of a Gibson//Guitar// (beautiful ORANGE finish) and stripped all the original parts and repalced them with high quality aftermarket parts from Amazon. I used Guyker Chrome Bridge and Tail pieces, Guyker locking tuning keys, and wiring harness using old Soviet Oil Paper Capicators (see description below) matched for these Seymour Duncan SLASH 2.0 Pickups. I have properly oiled the fredboard, leveled the frets and ensured the neck is straight. Intonation set. The Fredboard has that Gibson Nibs/Fret covered binding. (The Gibson PCB Harness is available for and additional $50, since I did not use it; after discussion with several other Luthers we decided to go with the Russian Capacitors).
6 String
Model Year 2025
Number of Frets 22
Body Material Mahogany
Fretboard Material Rosewood
Neck Material Mahogany
Seymour Duncan Slash 2.0 Humbucker Set
WIRING HARNESS - K40Y-9 Capicators 0.033uf
500K Ohms pots
Tolerance = +/- 8%
Bushing Height = 3/4 in. (Long Shaft)
Shaft Type - split
Shaft Diameter = .238 in (6mm)
Spline Count = 24 (NOT metric)
Hole size requirement = 3/8 in.
2 nuts and 2 washers per pot
2pcs 333J 630V. Capacitors
Gavitt Premium 22 Gauge Vintage Style Push Back Cloth Covered Wire.
Seymour Duncan Slash 2.0 Humbuckers:
The Slash 2.0 set is based off his signature APH-2 pickups, now with a hotter wind that provides the familiar
sound Slash loves while pushing his amps with the perfect balance of volume, drive, and compression.
Output - Neck: 8.8k, Bridge: 9.38k
Magnet: Alnico 2 - Rough Cast
Cable: Braided Shield
Type: Passive
New Old Stock, Russian Paper In Oil Capacitor. .033uf @ 630v. Paper In Oil dielectric in a metal can with glass sealed ends. The item is new, never used, arriving in original packaging.
.033uf is a great capacitance for use with Bridge or Neck Position Humbucker pickups, P-90's, giving a brighter more treble sound. Especially nice if you are playing a Mahogany body guitar like a Les Paul.
If used in a single coil pickup it gives a brighter sound/tone.
Slash's Signature Tone with Extra-hot Output The Seymour Duncan Slash 2.0 humbucker takes the top-hatted
one's signature APH-2 pickup and ups the ante with a hotter wind for hard-hitting performance in live
applications. Loaded with an Alnico II magnet, the Slash 2.0 delivers the same soft high-end attack and lowstring pull as its predecessor, along with a warm, extra-sweet sound that's thick, smooth, and offers near-endless
sustain. The guitarists here at Sweetwater appreciate the excellent, handbuilt quality of the Slash 2.0. If you're
searching for a way to push your amp with a fine-tuned balance of volume, drive, and compression, it's so easy
with Seymour Duncan Slash 2.0 pickups.Seymour Duncan Slash 2.0 Humbucker Pickup Set Features: Based on
Slash's signature APH-2 humbucker, but with a hotter wind Alnico II magnet delivers the same soft high-end
attack and low-string pull as its predecessor Yields a warm, extra-sweet sound that's thick, smooth.
https://www.youtube.com/watch?v=eKncfj4NI4k
https://www.youtube.com/watch?v=EFhd-l91GcI
https://www.youtube.com/watch?v=hr5lJtoY5Fo
I only accept cash. No scams like Money Orders, Cashier Checks, etc. Only if you are interested in making a cash trasaction. I will meet you at the Fayetteville NC Guitar Center where it is both safe and you can compare it to anything on the walls and test out on a variety of amplifers.